By Ian Dunbar, Rescue Consultant at Holmatro Rescue equipment. Before joining Holmatro Ian was a Training Officer in the UK Fire & Rescue Service with a background in both technical as well as medical rescue.

Sneak preview of F&R Q4: rapid intervention vs rapid extrication

Published:  21 October, 2014

Rapid intervention is a term that is often used when talking about extrication. In my experience, it seems to mean different things to different people and is often confused with rapid extrication (the rapid removal of a casualty from a vehicle for medical or safety reasons); something very different in my view, writes Ian Dunbar, rescue Consultant for Holmatro.

There is little (if any) reference to the concept available in literature or standard operating procedures and it is not reflected in the Team Approach to road traffic collisions. As the use of Rapid Intervention is increasing as a concept, it seems entirely appropriate to offer a definition, apply some rationale and introduce a method that assists with pre planning, training and implementation.

The Team Approach Rapid Intervention – a definition

 ‘A two stage response to vehicle extrication initially using specifically chosen resources to establish a safe system of work, prior to gaining access to the patient. The arrival of additional resources facilitates extrication with the completion of the Team Approach.’

 Some fire and rescue services provide a two-stage attendance to road traffic collisions. The Rapid Intervention response will usually arrive in the form of a smaller, often specially designed vehicle which carries strategically chosen equipment, including hydraulic rescue equipment (eg with combi tools) and a reduced number of personnel. Their role is to ensure a safe system of work (strategic planning) is established before commencing the Team Approach and gaining patient access on scene. The Supplementary response provides support with additional personnel and equipment (dedicated cutter/spreader and ram) to complete the extrication.

From this model we can clearly see:

-          The term ‘Rapid’ refers to the time taken to arrive at the incident due to the use of smaller, more agile vehicles and NOT the actual time taken to gain access to the patient (or to extricate them).

-          There is a need to commence the initial phases of the Team Approach with fewer personnel than it was originally designed for (i.e. 5/6 personnel on scene).

-          There is a clear distinction between the tools and equipment required for both phases of attendance.

-          The two-stage response actually splits the Team Approach, based on personnel and equipment that is likely to be on scene initially.

-          We are still endeavoring to extricate in 20 minutes or less.

 

Smaller vehicles, less equipment

The Rapid Intervention response will usually mean there are less tools, equipment and personnel available in the early phases of the rescue. Despite this, the same rules still apply and the Team Approach should be followed as far as practicable with the resources available. Due to the use of smaller vehicles the choice of tools and equipment for the rapid intervention attendance is crucial; size and weight is important whilst still ensuring that you have the necessary equipment to perform the required tasks. We know that once stabilisation has been completed the main priority is gaining access to the patient. This allows a full primary survey to be completed and the degree of entrapment to be established: vital information to formulate the extrication plan. In terms of hydraulic extrication equipment, the combi tool is ideal for rapid intervention as it provides both spreading and cutting capacity and will allow the rescuer to gain entry through doors (if the vehicle is on its wheels or its roof) and through the rear hatch (if on its side or roof). Of course there is now a wide choice of combi tools with varying power sources i.e. battery powered, hand powered or standard hose/pump configuration (with the ability to also utilize a battery powered pump). Another advantage of combi tools is that they will save weight and can weigh as little as 8.2kg. Other equipment may include a ram for space creation and a minicutter which is ideal for removing pedals and head restraints. In addition to this, smaller assist tools are required to complete tasks such as peeling and revealing (removal of interior trim) prior to the space creation phase.

Dynamic on scene

The implementation of the concept as described above means that rescuers have to be aware of the role they play in the Rapid Intervention response and should pre plan and train accordingly. The splitting of the Team Approach allows crews to develop a strategy and train for a two-stage attendance; it provides a clear illustration of what is expected by the Rapid Intervention and Supplementary crews.

Although the approach is identical to a standard attendance (ie the Team Approach) the dynamic on scene will be subtly different due to reduced numbers of personnel and a smaller equipment set. The on scene objectives of the Rapid Intervention response should be fully communicated and understood and if the incident is more complex (multiple casualties, multiple vehicles or restricted access) then it may be that creating a safe area, performing stabilisation, gaining access and establishing casualty contact is all that can be achieved prior to the Supplementary crew arriving. It is critical that incident commanders identify priorities and allocate their limited resources appropriately (this should also include a triage where there are multiple casualties involved). When extra personnel do arrive, safety critical information along with any plan that has been formulated must be communicated and the crews must immediately ‘gel’ to allow seamless integration and timely progression of the extrication.

Remember that just like with any other incident, an initial appraisal of the scene may mean that additional resources are required (in addition to the oncoming Supplementary response) and these should be ordered as soon as possible. Conversely, it may be that due to the time critical nature of the patient’s injuries the Rapid Intervention crew must extricate immediately in order that the appropriate medical interventions can be performed. Finally, the concept should be integrated into multi agency training to ensure the most effective on scene working relationship with police and ambulance services.

Conclusion

Rapid Intervention is often talked about but rarely defined. It is becoming more common in many parts of the world and it provides fire and rescue services with a different option for deploying personnel and equipment whilst at the same time changing the type and size of vehicle that responds in the first instance. This change often calls for small, lightweight yet powerful tools and rescuers must be familiar with their use for gaining access to the patient. The Team Approach still applies although rapid intervention means less people and equipment on scene in the early stages of the rescue; this requires a subtle adaptation of our thought process and crews must become familiar with the change in dynamic this approach brings. They should be aware of the clear objectives of the Rapid Intervention response and incident commanders must identify immediate priorities, brief the crew accordingly and oversee the arrival of additional resources to ensure continuous working. Finally, it must be remembered that such a model must incorporate multiple agencies on scene and it cannot extend extrication times; 20 minutes (or less) is still the aim.

   

  • Operation Florian

Sign up: eMagazine & eNewsletter

The latest issues in your inbox.

Company Profiles

Advancing rescue technology

The specialist supplier of quality PPE and Rescue Equipment to Emergency Services.

Revolutionizing fire fighting foam technology

The one-stop resource for fire fighting foam concentrates and custom-designed foam suppression systems hardware.

The ultimate in innovation, quality and service

For 60 years Lehavot has been delivering the world’s most advanced fire detection and suppression automatic systems

Trust the best, let us be your foam solution

AUXQUIMIA is a Spanish company whose main activity is the design, manufacture and commercialization of firefighting foam concentrates.

Williams Fire & Hazard Control offers a full line of specialized fire response equipment for oil and gas platforms

From storage tanks and pipeline emergencies to offshore platforms and vessels at sea, Williams' response personnel and specialized equipment quickly address adverse fire emergencies.

Foam fights fire

Europe’s foremost fire fighting foam manufacturer has been developing and producing foams since the 1920s.

Optical flame and open path gas detectors

Spectrex Inc. is a world leader in optical flame and combustible gas detection with over 30 years experience.

The leader in truck-mounted hydraulic platforms

Our mission is to provide the best and the safest solution to professionals that work at height.

The independent alternative

Dafo Fomtec AB is a privately owned company with head office in Stockholm Sweden and manufacturing in Helsingborg in the south of Sweden.

If you want quality, you want Zico

Since its inception Ziamatic Corp has provided the men and women of the fire service with products designed to make their jobs safer and easier.

Calendar