US Coast Guard proposes major changes to fire protection, detection and extinguishing regulations

Published:  14 January, 2014

Harmonization of Standards for Fire Protection, Detection, and Extinguishing Equipment is the most substantial update since 1952.

The Coast Guard proposes to amend its regulations for the design and approval standards for fire protection, detection, and extinguishing equipment on vessels, outer continental shelf facilities, deepwater ports, and mobile offshore drilling units.

The proposed amendments will:

  • Harmonise Coast Guard regulations with national and international consensus standards;
  • Address advances in fire protection technologies and standards;
  • Update Coast Guard approval processes for fire detection and alarm systems;
  • And revise Coast Guard regulations for other types of equipment or components (eg spanner wrenches, non-metallic pipes, and sprinkler systems).

According to the Rule, these proposed changes are necessary to ensure Coast Guard regulations remain current and address advances in technology. The Coast Guard fire protection, detection, and extinguishing equipment regulations addressed in this NPRM have not been updated substantially since 1952 and do not reflect the latest industry practices or technologies.

Summary – grouped by equipment type/topic

Fire detection and alarm systems

  • Provide vessels with the option to meet either the applicable International Convention for the Safety of Life at Sea, 1974 (SOLAS) and the International Maritime Organization (IMO) Fire Safety Systems (FSS) Code requirements, or updated Coast Guard regulations for the design and installation of fire detection and alarm systems. These proposed changes would provide vessel owners and/or operators and designers greater flexibility in fire detection and alarm system design for US domestic vessels.
  • Consolidate and update the fire detection and alarm system requirements in 46 CFR subchapter H (passenger vessels). These changes would also affect 46 CFR subchapters C, I, K, and T vessels where the regulations refer to subchapter H for fire detection and alarm system requirements. The consolidation of these requirements would make it easier for industry to locate and meet these requirements. The proposed updates reflect advancements in the fire detection and alarm systems industry, which include development of digital technology and modern seamless electronic technology for the much larger land-based market. The Coast Guard would not require retrofitting of currently installed systems, but would require any modifications to installed systems or new installations to comply with the updated requirements after a 2.5-year compliance period.
  • Revise Coast Guard approval processes for fire detection and alarm systems by allowing manufacturers of fire detection and alarm systems equipment the option of seeking approval for an entire system or an individual device; making approval processes easier for manufacturers by allowing some approval tests to be completed by an approved third party nationally recognised testing laboratory (NRTL); and requiring the use of the most current and widely used national consensus standards for approval of fire detection and alarm systems, as specified by this rulemaking. These revisions would allow for an easier replacement of individual devices and open the market to small manufacturers or to those dedicated to making components but not producing all components necessary for a complete detection system. They would also provide manufacturers more flexibility and options for choosing a laboratory; and align Coast Guard regulations with the most up-to-date national consensus standards that are already widely used by the fire detection industry.

Fire extinguishers

  • Replace the Coast Guard's weight-based rating system for fire extinguishers with the Underwriters Laboratory (UL) performance-based rating system. Adopting the national industry standard rating system would streamline the selection, inspection, and approval processes for marine fire extinguishers.
  • Revise maintenance requirements for fire extinguishers by adopting National Fire Protection Association (NFPA) 10 “Standard for Portable Fire Extinguishers” (2010 Edition), which requires certified personnel to conduct annual fire extinguishing equipment maintenance. NFPA 10 distinguishes between monthly inspections (a visual check) and annual maintenance (a thorough inspection of materials and components, and associated repairs). Vessel crewmembers could continue to perform monthly inspections, however, a certified person would be required to conduct annual maintenance. This proposed change would align Coast Guard regulations with the current industry practice of having annual maintenance performed by commercial servicing companies.
  • Codify use of UL standards for testing and labeling of fire extinguishers. These standards provide detailed, technical requirements for construction, performance, testing, packaging, and marking of the specific type of extinguisher. This proposed change would align Coast Guard regulations with current industry practice.
  • Reduce the number of spare portable fire extinguishers required on vessels traveling domestic routes. This change is proposed because of the proposed enhanced maintenance requirements that would result in more reliable spares, as well as making new spares more easily obtainable.

Fire protection equipment approvals

  • Add new specification subparts in 46 CFR subchapter Q to address existing and new approval series for fire protection equipment and components required for use on SOLAS ships. The new approval series would codify the standards and procedures currently used by industry to obtain Coast Guard approval for fire protection equipment and components required on SOLAS ships. The new approval series would set forth design, construction, testing, and performance requirements for the affected equipment and components satisfying SOLAS requirements.
  • Codify an alternative path to Coast Guard approval through an existing Mutual Recognition Agreement (MRA) to which the US is a party, allowing for Coast Guard approvals of certain fire protection equipment issued by another nation that is party to the MRA. This proposed change would reduce manufacturer costs and burdens associated with duplicative testing and evaluation for multiple national approvals.

Feedback should be received by 14th April 2014. To comment on the proposed changes, click here. 

  • Operation Florian

Sign up: eMagazine & eNewsletter

The latest issues in your inbox.

Company Profiles

Renka´s Fire Engine No. 1

Firefighting, fast, safe, everywhere. Michael Renka GmbH, based in Germany, is a manufacturer of firefighting vehicles, pumps and rescue equipment.

Waterax - We move water

Trusted by wildland firefighters around the world, WATERAX sets the industry standard by developing innovative, portable fire pumps and water-handling equipment designed to withstand demanding applications and rugged environments.

Big Water Flow for Industrial and Municipal Firefighting Applications

Protecting the lives of the public and firefighters while limiting the structural damage caused in large scale fires is our primary mission

We are committed to improving lives and doing business in the right way

We have a unique mix of capability and culture that we refer to as 3M Science and we strive to develop products that improve people’s daily lives in a multitude of ways.

HazSim - Bringing situational HazMat training to life

HazSim, LLC provides innovative simulation training to ensure your team works safely and effectively. HazSim Pro simulation equipment is in use by hundreds of fire departments, training schools, industrial fire teams, and private trainers across the US, Canada and further afield as well as the US Army.

The ultimate in innovation, quality and service

For 60 years Lehavot has been delivering the world’s most advanced fire detection and suppression automatic systems

Advancing rescue technology

The specialist supplier of quality PPE and Rescue Equipment to Emergency Services.

Revolutionizing fire fighting foam technology

The one-stop resource for fire fighting foam concentrates and custom-designed foam suppression systems hardware.

Trust the best, let us be your foam solution

AUXQUIMIA is a Spanish company whose main activity is the design, manufacture and commercialization of firefighting foam concentrates.

Williams Fire & Hazard Control offers a full line of specialized fire response equipment for oil and gas platforms

From storage tanks and pipeline emergencies to offshore platforms and vessels at sea, Williams' response personnel and specialized equipment quickly address adverse fire emergencies.

The leader in truck-mounted hydraulic platforms

Our mission is to provide the best and the safest solution to professionals that work at height.

If you want quality, you want Zico

Since its inception Ziamatic Corp has provided the men and women of the fire service with products designed to make their jobs safer and easier.

The independent alternative

Dafo Fomtec AB is a privately owned company with head office in Stockholm Sweden and manufacturing in Helsingborg in the south of Sweden.